CE marked drip controller

Drip controller, Small Infusion pump, it is very small,convenient

Drip controller: 

I. Features:1. Auto-adjust the infusing speed according to the set requirement.2. Set the total infusing volume and time, auto-calculate the dripping speed and auto-adjust.3. Set the total infusing volume and speed duration of the whole infusion.

4. According to the set warning volume, auto-alarm and remind medical staff of changing the bottle or going on other operation when the liquid reaches the warning volume.

5. After finishing the infusion, it can stop the infusion besides alarming.

6. During infusion, if the infusing fault happens, it will auto alarm the medical staff to deal with it in time.

7. During infusion according to the patient's condition and the requirement of drug, it can change the original set parameters at all times.

8. During infusion, it can check the current infusing speed, the infused volume and the duration spent at any time.

9. During infusion, it can restore the original set parameters. After finishing infusion, it can check the infusing speed,

10. Total volume and the consumed time for this time. It will benefit to the clinical records.

II. Specifications:

1.Transfusion method: Free falling;

2.Setting limit:

Dropping speed: 1drop/m-120drops/m;

Total dosage: 1ml-5000ml

Hours: 1minute- 24 hours

Warning: 5ml-500ml

3.Precision: ±2% over 10 drops/minute time; ±1% less than 10 drops/minute time;

4.Controlling method: Infrared monitoring, electric automatic valve control;

5. Power consumption: 0.9VA

6. Power supply: available for both direct and alternative current, AC220V/50Hz and DC 4.8/100mAH

7.Dimension: 110LX82WX37H(mm)

8.Weight: 200g( including battery)

CE marked drip controller